How to Ship TCG Cards Safely
Good packaging is the difference between a happy buyer and a dispute. Everything you need to pack and ship cards safely.
Last updated 17 days ago
What You'll Need
Before packing your first order, stock up on these essentials:
Packaging Step by Step
The golden rule: every card needs a sleeve, something rigid, and an outer mailer. Here's the full process.
Step 1: Sleeve the Card
Slide the card into a penny sleeve. Make sure the opening of the sleeve faces down (away from the card's top edge) so the card can't slide out during handling.
Step 2: Into a Toploader or Card Saver
Place the sleeved card into a toploader (rigid plastic holder) or a Card Saver (semi-rigid holder). Both prevent the card from bending in transit.
If the card fits loosely in the toploader, add a small piece of painter's tape across the opening to keep it from sliding out.
For multiple cards going to the same buyer, you can stack sleeved cards in one toploader (up to 3-4 cards) or use individual toploaders.
Step 3: Seal It Up
Place the loaded toploader(s) inside a team bag and seal it. This adds a moisture barrier. Tape the team bag shut with painter's tape for extra security.
Never use regular clear tape directly on toploaders or card sleeves. The adhesive can transfer to the card and cause damage. Always use painter's tape (blue tape) — it's designed to peel cleanly without residue.
Step 4: Into the Mailer
Choose your outer packaging based on order size (see the next section), and place the sealed team bag inside. If there's room for the card to move around, add a small piece of paper or cardboard as padding.
Packaging by Order Size
Small Orders (1-4 cards)
Option A — Bubble mailer (recommended)
Sleeve + toploader + team bag inside a padded bubble mailer.
This is the safest option for valuable singles and what most experienced sellers use.
Option B — Plain White Envelope (PWE)
Sleeve + toploader, sandwiched between two pieces of cardboard, inside a standard envelope.
Cheaper to ship, but offers less protection. Best for low-value cards only.
Write "Do Not Bend" and "Non-Machinable" on the outside of the envelope.
If the order is worth more than about $10 / €10, always go with a bubble mailer or rigid mailer instead of a PWE. The small extra cost is worth the peace of mind. A PWE is also how an untracked letter travels: see Tracked or untracked? below.
Medium Orders (5-49 cards)
- Sleeve each card individually. Place sleeved cards in toploaders or stack them neatly.
- Bundle toploaders together with painter's tape or rubber bands around the toploaders (never directly on the cards).
- Place bundled cards in a bubble mailer with some padding.
- For 20+ cards, consider a small card storage box inside a bubble mailer or padded envelope for extra protection.
Large Orders (50+ cards or sealed product)
- For large singles orders: use a card storage box (100-count or similar) inside a small shipping box.
- For sealed product (booster boxes, bundles, cases): use a sturdy corrugated box with bubble wrap or packing paper on all sides.
- Fill any empty space so items can't shift during transit.
- Seal the box securely with packing tape.
What NOT to Do
Loose cards in an envelope — Cards will get destroyed by mail sorting machines.
No sleeve before toploader — The toploader itself can scratch an unsleeved card.
Rubber bands directly on cards — They leave marks and dents. Use them around toploaders, not cards.
Regular tape on cards or sleeves — Adhesive residue damages the card surface. Use painter's tape.
Overstuffing a toploader — Don't cram 6+ cards into one toploader. They'll bend and scratch each other.
No padding in the mailer — A toploader rattling around in an empty bubble mailer can still get damaged.
Skipping moisture protection — A team bag takes 2 seconds and prevents water damage if the package gets wet.
Tracked or untracked?
Tracked shipping is the standard on CardNexus. When you mark an order as shipped, you enter the tracking number and the buyer follows the parcel from their order page. We support 1,200+ carriers worldwide, so whatever postal service or courier you use, we can track it.
Small, low-value orders can also travel as an untracked letter: a stamped envelope with no tracking number. In the United States and Canada it is on for every seller, with default letter prices you can change: if you don't want to send untracked letters, turn it off in your shipping settings. In Europe it is off until you switch it on. It only applies to XS and S orders under a value cap, shipped inside your country or your region. The buyer sees "Untracked" next to the shipping price before buying and cannot ask for tracking instead: you choose the method and carry the risk that comes with it. The order closes, and you are paid, 10 business days after you mark it as shipped, unless the buyer confirms receipt earlier or reports a problem.
Who carries a lost letter: in Europe and in Canada, you do. If the buyer reports that the letter never arrived, the buyer is refunded and you receive nothing for the sale. In the United States, a letter with a scanned postage barcode is covered by CardNexus Shield at no cost; a plain-stamp letter is at your risk. The caps, sizes and conditions are in the Shipping Policy.
Pack an untracked letter like Option B above: sleeve, toploader, two pieces of cardboard, "Do Not Bend" on the envelope. Keep your proof of posting.
What about Shield?
CardNexus Shield covers your shipment against loss, theft, damage and non-delivery. In Europe, you add it when marking a tracked parcel as shipped, for 1% of the items' value; it is not available on untracked letters. In the United States and Canada, Shield is included at no cost on tracked parcels and on US letters with a scanned postage barcode. See CardNexus Shield: shipping insurance for sellers.
Envelope Tips
Write "Do Not Bend" on both sides
Write "Non-Machinable" on the front (this tells the post office to hand-sort it instead of running it through machines that can crush cards)
Consider adding "Fragile" for extra measure
Make sure postage is correct — underpaid postage means the package gets returned or the buyer pays the difference
Quick Reference Checklist
Before sealing your package, run through this list:
Every card is in a penny sleeve
Sleeved cards are in toploaders or card savers
Toploaders are sealed (team bag or painter's tape)
Cards can't move around inside the mailer
Outer packaging matches the order size
Tracking number is ready
Do Not Bend" marked on envelopes
What's Next?
Shipping Rates & Packaging Guide — Default package tiers, and how rates are calculated
Shipping Your Order — How to mark orders as shipped and enter tracking on CardNexus
Tracking Your Order — How tracking works for buyers
Was this helpful?
More in Shipping & Packaging Guide
CardNexus Shield: shipping insurance for sellersStill need help? Ask the team